Installation Instructions
- Step 1
- Clean the floor drain pipe and remove dirt.
- Place the rubber flange seal firmly on the drainage pipe.
- Ensure tight adhesion to prevent odor and leakage.
- Step 2
- Align the toilet outlet with the flange ring.
- Put down the bowl slowly and press evenly.
- Adjust level front & back, left & right.
- Step 3
- Drill holes and install expansion bolts to fix the base.
- Put rubber gaskets between tank and bowl.
- Fasten the tank bolts to avoid water seepage.
- Step 4
- Wrap Teflon tape on the angle valve thread.
- Connect water hose between angle valve and tank inlet.
- Tighten properly, do not overexert.
- Step 5
- Open the water valve, fill the tank and flush several times.
- Check all joints for water leakage.
- Apply mildew-proof silicone glue around the toilet base.
Entrust your home to the experts.
- Crafted bathroom solutions for modern living.
- Upgrade your bathroom with premium sanitaryware.
- Redefine comfort in every bathroom moment.
